Filter Results By:
Products
Applications
Manufacturers
SMT
"Surface Mount Technology" printed circuit board testing. AKA: Surface Mount Technology
See Also: QFN
-
product
Expanding In-Circuit Capabilities
Circuit Check supports reading linear bar codes and 2D symbols within each of its fixture product lines.When spring-loaded probes are not practical or access is limited, Circuit Check can help you with thru-connector tests to contact connectors on any surface or edge of a circuit board. These tests can be implemented spring probes, mating connectors, sacrificial SMT connectors, and stabber cards.
-
product
Tx/Rx BenchBlade
This ATCA compatible test card offers the flexibility to verify the performance of Advanced TCA fabric and base channels. The set of four Transmit pairs and four Receive pairs allows access to a full channel's eight pairs for logic card characterization. The card includes a HM-ZD male right angle connector segment for access to the Zone 2 connectors of a switch fabric or node card. Edge-launch SMA connectors are utilized for ease of test cable attachment. SMT pads are included on the receive pairs.
-
product
Voltage Variable Attenuators
a High Reliability Low Noise Voltage Controlled Oscillator (VCO) which covers a 10 MHz to 20 MHzfrequency band with a voltage tuning range from 0V to 20V. This design features exceptional phase noise performance of -120dBc/Hz @ 10 kHz offset. Supply Voltage is +15V with a generated output power level of +10 dBm and 2nd harmonic output of-11 dBc typical. The assembly is RoHs compliant and available in a compact 0.5 inch SMT package with an industry standardmounting footprint. The bottom surface is copper clad with 2-5 micro inches of immersion Gold over 150 - 250 micro inchesof Electro less Nickel which makes it resistant to oxidation for ease of soldering. The VCO operates over a temperature rangeof -40°C to +85°C and is designed to meet a variety of MIL-STD-202 test conditions including Humidity, Shock, and Vibration.
-
product
RF/Microwave Assembly Capability
Teledyne Labtech offers a comprehensive build-to-print microwave module and microwave components manufacturing service. This includes MMIC placement, Au wire bonding, SMT assembly and test.Our microwave MIC production facility is housed in a class 10,000 clean room that accommodates manual chip placement and semi-automatic wire bond assembly. Dedicated microwave components manufacturing is undertaken within production cells established to meet specific customer or product requirements.
-
product
Comb Generators
Macom Technology Solutions Holdings Inc.
MACOM offers a family of Non-Linear-Transmission-Line (NLTL) GaAs Comb Generators offering superior phase noise performance up to -18 dBc/Hz better then a SRD, usable harmonics out to 50 GHz, and available in SMT or connectorized packages. Standard drive levels from 18 - 21 dBm.
-
product
SMT Surface Mount MEMS High-G Shock Accelerometers
Piezoresistive MEMS high-amplitude shock accelerometers represent state-of-the-art industry technology for miniature, high amplitude, DC response acceleration sensors. This series is capable of measuring long duration transient motion as well as responding to and surviving extremely fast rise times, typical of a high-g shock event as found in explosive, gun and impact testing. Both packaged and OEM configurations are offered, to fulfill a variety of installation requirements.
-
product
Light Source Series
*High output power*Stable and reliable*CW or MOD output*MOD frequency: 270Hz/1KHz/2KHz*SMT, lightweight*Power supply by battery
-
product
256-Element Active Antenna Innovator’s Kit
AWA-0142
The AWA-0142 is an active array for 5G wireless applications developed using planar antenna technology resulting in a very low profile, lightweight unit. The surface mount assembled antenna board is based on Anokiwave’s AWMF-0135 Silicon Quad Core IC and demonstrates the performance achievable using low power silicon integration and efficient antenna layout and design. Using the AWMF-0135, the antenna provides +60dBmi (1000 W) of EIRP. The electronic 2D beam steering is achieved using analog RF beam forming, with independent phase and gain control in both Tx and Rx operating modes. The AWA-0142 antenna leads the way in showing how 5G coverage can be rolled out by network operators using the mmW bands, with low power footprint and high energy efficiency, while meeting key operating specifications for data rate, latency, coverage, and reliability.
-
product
Film Capacitors
Electronic Equipment Use
Panasonic Industrial Devices Sales Company of America
Panasonic Film Capacitors offer stable capacitance and temperature characteristics, tight tolerances, low-ESR and low dissipation factors. Available in Surface-Mount (SMT) and radial leaded types, including Metallized Polypropylene Class X2 Capacitors. Functionality offered in the Film Capacitor product line for Electronic Equipment Use include high temperature and high reliability without shock noise, piezoelectric effect and audible noise.
-
product
High Resolution Inline AXI Platform
AXI XS Series
The XS-platform series is a small-footprint high-resolution automated X-ray inspection system concept designed for sophisticated high-speed inspection of semiconductor samples, wire bonds and PCB-assembly boards for single/multipanels or samples in trays. The inspectable applications range from component level inspection to mid-sized SMT boards.
-
-
product
SDLVA
Analog Devices successive detection log video amplifiers (SDLVAs) include an operating range of 0.1 GHz to 20 GHz. Our SDLVA products are ideal for high speed channelized receiver applications and they are available in highly compact SMT ceramic packages.
-
product
To-5 Package, Through-Hole or SMT Mounted, Latching DPDT, DC-1GHz
Part No. HR422K, HRS422K
TO-5 package, through-hole or SMT mounted, latching DPDT, DC-1GHzAvailable options include:HR422K High shock, latching, through-hole mounted, DPDTHRS422K High shock latching, SMT J-lead mounted, DPDTResistive: 1 Amp/28Vdc Inductive: 200 mA/28Vdc (320 mH) Lamp: 100 mA/28Vdc
-
product
Mek Selective 3D AOI
Every one of our desktop AOI and inline AOI systems is optimised for the demands of today’s advanced SMT applications and critical manufacturing environments. All are capable of delivering Selective 3D, using our unique stereoscopic imaging from the 9 cameras of the GTAz /GDAz optical heads.
-
product
Line Testers
GAOTek provides a large collection of certified and feature-rich line testers for sale to the United States, Canada and Globally. These devices are mainly used for line installation, line performance testing, inspection, and maintenance of the telecommunication networks. They are particularly designed to accelerate telecom trouble shooting and with the help of latest technology they are equipped with a smart CPU, IC, and SMT. These devices have some unique features such as caller ID display and last number redial. Moreover, it can also be used for multi-line testing, wire pair checking, inspection of line insulation and test for breaks and faults.
-
product
Preselectors
BSC have full design expertise in house to offer a range of preselectors suitable for any receiving system. Products can be offered in traditional machined and laser sealed aluminium bodies or in ultra-compact true SMT form factor, matched to carrier PCB’s.
-
product
EDFA
SEM1550 Series EDFA Module
Hangzhou Softel Optic Co., Ltd.
*Adopts JDSU or Oclaro pump laser.*Adopts OFS fiber.*SMT production process to assure small size and low power consumption ,but high stability*Micro monitor PCB*Output adjustable(-4~+0.5)*Max outputs 23dBm(single pump laser).
-
product
Resister
Our ARFC type Film Flat Chip Resistor & ARFCN type Thin Film Chip Resistor Network are high precision Metal Film resistors produced with high purity. Alumina Substrate and Ni-Cr-Si Resistor Film based on high precision Etching Technology. The electrode Terminals are made with Spattering Film and Nickel-Solder Plating, and solderability is very good in all Flow, Reflow and Dipping type soldering for Hybrid IC, SMT, PCB etc. Our ARFC Metal Film Resistor & ARFCN type Thin Film Chip Resistor are being produced under the thorough quality control, and are being used widely in high precision and high reliability electronics circuit such as Measuring Instrument, Medical Instruments, Communication and other Industrial Instruments.
-
product
Single Phase Energy Meter Type DDS999
Bofa Instrument & Equipment Co., Ltd
DDS999 series Single Phase energy Meter are new and high-tech products adopting special large-scale IC, latest micro-electronic technology and SMT production crafts. It is designed for rough working condition and components selection as foundation, so it can ensure the long-term stable operation.
-
-
product
Composite Inductors
Composite inductors are constructed by inserting a pre-wound coil over pre-press magnetic core and then pressing or molding a magnetic material around this assembly. The composite inductors are very similar to molded but typically offer lower DCR and lower overall losses. Our composite core inductors provide a fully shielded, high energy density, soft saturation solution for applications up to 120Apk. The construction enables the highest energy density of any available SMT inductors and also minimizes acoustic noise. We offer both commercial grade (-40C to 125C) and automotive grade (-55C to 155) in a wide range of platforms from 4x4x2mm to 17x16x13mm.
-
product
SMT Inspection Templates
Inspection templates enhance the visual inspection process by guiding the operator's eyes to a specific location on the board to check for the presence and correctness of components.StenTech’s pin support templates are manufactured from a clear acrylic material to allow for a rigid template. They are designed to match the board sizes, allowing you to process the template through different processes. By using it in your screen printer, you can easily guide the pins to support the board into place, reducing setup time, reducing damage to components by the pins and creating a good support for the board during printing. We can also provide our customers with a 1:1 ratio Mylar for inspection needs. We can generate your Mylars from Gerber or DXF files that are sent electronically.
-
product
Integral Intelligent Flame Detector
FS-100
FS-100 utilizes SMT technology which integrates a photoelectric sensor, a microprocessor, and a Human-Computer Interface (HCI) and an output interface together, sending out various outputs including an ON/OFF flame signal, a fault signal, a 4-20mA signal, and an RS-485 output (meets the MODBUS standard) via the quick connector.
-
product
1.3W to 25W - Single Output / Multiple Output
CC-E Series
*Compact Footprint / Low Profile*5, 12, 24 and 48 Vdc Nominal Inputs*3.3, 5, 12, 15, ±12, ±15 Vdc Outputs*500 Vac Isolation*-40 to 85 °C Operating Temperature*Through Hole or SMT Versions*Five year warranty
-
product
6 GHz Non-Latching DPDT
Part No.s GRF100, GRF103
Centigrid hermetically sealed package, SMT straight-lead mounted, non-latching DPDT, with high insertion loss repeatability Bandwidth: DC - 6GHzAvailable options include:GRF103 - low power coil
-
product
6 GHz Non-Latching DPDT
Part No.s GRF300, GRF303
TO-5 hermetically sealed package, SMT straight-lead mounted, non -latching, DPDT, with high insertion loss repeatabilityBandwidth: DC - 6GHzSignal Integrity up to 18GbpsAvailable options include:GRF300D - transient protection diodeGRF300DD - transient and reverse polarity protection diodesGRF303 - low power coilGRF303D - low power coil, transient protection diodeGRF303DD low power coil, transient and reverse polarity protection diodesResistive: 1A /28Vdc
-
product
Double Sided PCB
Double Sided PCBs (also known as Double-Sided Plated Thru or DSPT) circuits were the gateway to higher technology applications. The advent of the plated thru hole was quickly adapted and allowed electronic designs to expand in capability and shrink in physical size. Today the double sided printed circuit board technology remains the workhorse of the assembly industry. There are near limitless applications for old and new designs. Fine line surface mount, ultra high copper build, high and low temperature, Solder coated, Silver, and Gold finishes are just a few examples of DSPT applications.
-
product
18 GHz Latching SPDT
Part No.s GRF121A, GR121AR
Extended-Centigrid hermetically sealed package, SMT straight-lead mounted, magnetic-latching SPDT, with ungrounded contacts, and a common coil negativeBandwidth: DC - 18GHz Signal Integrity: 40Gbps Available options include:GRF121AR - common coil positiveResistive: 0.25A /28Vdc
-
product
3D SPI
Omron’s advanced inspection systems help manufacturers meet the requirements of today’s SMT applications while improving throughput and sharpening their competitive edge.
-
product
Combo Test Lead Kit
U8201A
Designed for use with U3606A DMM | DC power supply; includes leads, probes, alligator clips, SMT grabbers, and banana plugs
