Filter Results By:
Products
Applications
Manufacturers
Infrasonic Sound
< 20 cycles per second frequency.
-
product
Infrasonic Array
Geosonic
An Infrasonic Array works like a sonic antenna, it is able to detect the magnitude and the source of sound waves. The Geosonic array is able to detect also pressure waves that the human ears can’t hear. A typical pressure wave is that generated by an explosion or by any physical phenomena (natural or human created) that generates an air pressure wave, which means that the Geosonic array can be used to detect a lot of phenomena, like:
-
product
PXIe-4492, 204.8 kS/s, 113 dB, 2 Gains, 0.5 Hz AC/DC-Coupled, 8-Input PXI Sound and Vibration Module
781490-01
204.8 kS/s, 113 dB, 2 Gains, 0.5 Hz AC/DC-Coupled, 8-Input PXI Sound and Vibration Module - The PXIe‑4492 is designed for sound and vibration applications. With 24-bit analog inputs and IEPE constant current signal conditioning, the module is ideal for making precision measurements with microphones, accelerometers, and other transducers that have very large dynamic ranges. The PXIe‑4492 delivers simultaneous sample on all channels. In addition, it includes built-in antialiasing filters that automatically adjust to your sample rate, software-selectable input gains, and TEDS smart sensor support for error-free setup. Common applications include noise, vibration, and harshness (NVH) analysis; large microphone arrays; and dynamic structural test.
-
product
PXIe-4463, 51.2 kS/s, 2-Output PXI Sound and Vibration Module
783086-01
The PXIe‑4463 offers high dynamic range and THD+N for audio, acoustic, and vibration applications. It provides the high precision and dynamic range necessary for the most stringent audio generation requirements in a modular form … factor. The PXIe‑4463 contains two 24-bit digital‑to‑analog converters to allow for fully differential simultaneous generation. Complete with three gain ranges, the PXIe‑4463 can generate current with programmable, per channel output configurations. The two timing engines allow you to perform multisample-rate applications on a single module and independently start and stop channels on a single module.
-
product
PCI-4461, 204.8 kS/s, 118 dB, 3.4 Hz AC/DC Coupled, 2-Input/2-Output Sound and Vibration Device
779307-01
The PCI‑4461 is a high-accuracy data acquisition module specifically designed for sound and vibration applications. It provides simultaneous two-channel dynamic signal generation and simultaneous two-channel dynamic signal acquisition with six gain settings to configure the input range. The PCI‑4461 also includes software-configurable AC/DC coupling and integrated electronic piezoelectric (IEPE) conditioning to ensure precision measurements with microphones, accelerometers, and other transducers that have very large dynamic ranges. Common applications include audio test; automotive test; noise, vibration, and harshness (NVH) analysis; and machine condition monitoring.
-
product
PXIe-4463, 51.2 kS/s, 2-Output PXI Sound and Vibration Module
783086-02
51.2 kS/s, 2-Output PXI Sound and Vibration Module - The PXIe‑4463 offers high dynamic range and THD+N for audio, acoustic, and vibration applications. It provides the high precision and dynamic range necessary for the most stringent audio generation requirements in a modular form factor. The PXIe‑4463 contains two 24-bit digital‑to‑analog converters to allow for fully differential simultaneous generation. Complete with three gain ranges, the PXIe‑4463 can generate current with programmable, per channel output configurations. The two timing engines allow you to perform multisample-rate applications on a single module and independently start and stop channels on a single module.
-
product
Sound Meters
Features three-decibel ranges for greater precision: low (35.0 to 80.0 dB), medium (50.0 to 100.0 dB), and high (80.0 to 130.0 dB). Resolution is 0.1 dB and accuracy is ±2 dB.
-
product
Sound Meter
Shenzhen UYIGAO Electronic Technology Co., Ltd
The meter can test Sound Level and Temperature.
-
product
Sound Level Meters
LXT1-QPR
Quantitative measurements of sound pressure levels generated by firearms with & without suppression devices and silencers.Many firearm examiners are tasked with determining whether installation of a suppressor or silencer on a firearm results in a “perceptible” reduction of the sound pressure level of a gun. The Larson Davis SoundTrack LxT® provides this functionality utilizing an easy-to-use handheld platform.
-
product
Sound Level Meter
The Sound Level Meter is shown positioned near the top of the main Daqarta window. Like the Voltmeter and Frequency Counter, it can be positioned anywhere on the screen, and the size of the display font changes when you resize the meter by dragging its borders. You can fill the screen for a really big readout that can be seen from across the room.
-
product
Fluctuation Sound Analyzer
OS-2760
Fluctuation Sound Analyzer the OS-2760 is package software consists of the OS-2700 and plug-in options including fluctuation sound analyzer which is developed with new concept of sound quality evaluation parameter. This software makes clear sound features based on the two axes of frequency and fluctuating frequency by using new concept of [time fluctuation] as well as six parameters of physical quantities such as loudness, sharpness, roughness, fluctuation strength, AI (Articulation Index), tonality.
-
product
Sound Level Meter
735
Whether you are testing for OSHA compliance, quieting equipment, or monitoring the roar of a stadium crowd, B&K Precision's Sound Level Meters can get the job done. The model 735 Sound Level Meter provides 30~130 dB capability in three convenient measurement ranges Low, Med and Hi with an accuracy of ±1.5 dB. The meter meets the IEC 651 Type II and includes frequency weighting A & C and fast and slow time weighting.
-
product
Sound Level Meters
LA-4441A|LA-1411/1441A
Three models of sound level meter LA-1411/1441A(Class 2) and LA-4441A (Class 1) are applicable to IEC 61672-1:2013, JIS C 1509- 1:2017. The all models can perform simultaneous measurement of seven sound parameters including equivalent continuous sound level without adjusting the level range corresponding to the sound fluctuation and display the selected parameters.
-
product
Sound Power Measurement
Dewesoft sound power measurement solution merges the best of both worlds: widely established sound power measurements with familiar, distinctive user interface and industry unmatched adaptability. Rate and compare different noise sources with ease and exactness while simultaneously monitor any number of additional parameters.
-
product
Sound Level Meters
Acoustic Data These definitions are intended simply as an aid to understanding and for this reason, some are not strictly scientifically accurate. For correct formal definitions, consult IEC standards 60651, 60804, 60942, 61252 and IEC 61672: 2003 part 1.
-
product
Sound Level Meters
A sound level meter is used for acoustic (sound that travels through air) measurements. It is commonly a hand-held instrument with a microphone. The diaphrahm of the microphone responds to changes in air pressure caused by sound waves.
-
product
Digital Sound Detector
FSB-8D
The FSB-8D is a small, compact electronic sound detector for finding water leaks.Especially, FSB-8D is well-suited to Water Leak Surveying on pipe of Plastic pipes like PVC and PE.
-
product
Industrial Sound Enclosures
Eckel Noise Control Technologies
The Convenient method for controlling noise and improving the work environment.
-
product
Sound Dosimeter
897
Designed for conducting personal noise surveys, the 897 Dosimeter is versatile enough for the experienced hygienist but simple enough for the novice technician. The data storage feature allows you to view reports on the computer or print them for use later during inspections. Purchase the 897 by itself or in the SMS-2 kit with all of the relevant accessories, including calibrator, nose cone, microphone clip, wind screen, and serial and parallel printer cables.
-
product
Sound Power Reference Source
Qref
Precision omni-directionallity in all directions, horizontal and vertical plane. This source has a frequency range of application between 100 and 8000 Hz (third octave bands) Despite only weighing 1.4 kg and having a diameter of 105 mm, it produces a maximum sound power level of Lw 104 dB.
-
product
Sound & Vibration
Ono Sokki Sound & Vibration measurement products - sound level meter, microphone & amp, accelerometer, vibration, laser doppler vibrometer, and related software.
-
product
Environmental Sound Meter
SONIK-E
Ultra low sound level detection with the SONIK-E, Environmental Sound Meter. SONIK-E is the pick up and go noise meter for any environmental noise assessor. It's solid and dependable, and is our most robust sound meter yet making it perfect for your most rugged environments.
-
product
Sound Level Test System
In a world where precision and performance rule, measuring and controlling sound levels can be crucial to the success of your product or project. The team at Integrated Test & Measurement (ITM) have developed a customized solution that not only measures and collects sound-level data, but will help your team identify the specific components causing all that noise.
-
product
Impulsive Sound Source
BAS006
The BAS006 is an innovative device used to create impulsive noise that includes low frequency energy and avoids problems like secondary bounce. These characteristics make it a great choice for quickly measuring reverberation time when the complexity and weight of a speaker and amplifier is not needed.
-
-
product
Sound Analysis-Synthesis
iNSTiTUT DE RECHERCHE ET COORDiNATiON ACOUSTiQUE/MUSiQUE
The analysis of sounds includes methods enabling the permanent extraction or automatic structuring of diverse sorts of information given off by the signal, such as the fundamental frequency or the spectral evolution determining the pitch and timbre of a perceived sound. Information outside what is strictly musical is also taken into consideration, notably concerning industrial acoustics, sound design and multimedia as well as the automatic indexing of recorded sounds. The methods used are based on signal processing, statistical analysis, information theory, machine learning and recognition techniques, but also on knowledge of auditory perception.
-
product
Sound Level Meter
3310 SL
Standard Electric Works Co., Ltd
● Max. & Min. function● Over & under range indication● 4-digit LCD● Frequency weighting characteristic for 2 times per second● AC signal output● Low battery indication● Auto power off (10 minutes)● Backlight function● 200 measurement results can be saved in the memory and recalled on the display● Indication of date, time
-
product
Sound Level Meters
Advanced technology ensures the accuracy and stability of the sound level meter.
-
product
Sound Meter
4431
The Kanomax Sound Meter – Model 4431-1G is the world’s first 0-dB function sound meter available. It is designed to meet Type 2 standards for ANSI S1.4 1983 and IEC 61672-1. The magnetic accelerometer easily attaches to machinery for increased accuracy and precise operation.
-
product
Sound Quality Meter
OROS Sound Quality Meter is a dedicated solution for calculating psycho-acoustics metrics for Sound Quality studies. A signal file can be simply loaded. The first initial step is to listen to the signal that has been recorded. The second stage is to select the required parameters and to compute them
-
product
Sound Level Meter
2310 SL
Standard Electric Works Co., Ltd
Max. & Min. function. Over & under range indication. 4-digit LCD with bar graph. Frequency weighting characteristic for 2 times per second. AC signal output. Low battery indication.
